Panel Profiles

Highway 49 North
Gulfport, MS 39503
Phone (228) 831-3655
Fax (228)  831-3658

Call or email Steve Lee or Sonja Hill Today!
(Click here for a complete Staff Directory including email addresses.)

Click here for available colors:  Colors

Our Metal Products division can help you with almost any size metal construction project. From a few pieces of metal that we keep in stock at all locations to an entire metal building complete with red iron and all accessories and installation supplies. All under one roof, talk about keeping it simple!

We carry Malco sheet metal tools and Nova Flex metal roof sealant. We manufacture 7 metal profiles at our facility. We have 19 Colors (and Galvalume) in stock, in the following gauges:29, 26, and 24. We carry fasteners and pop-rivets in all the colors of metal that we supply. And if you need touch-up paint we can factory match your color too.

Our available panel profiles are:

5V
[singlepic id=114 w=320 h=240 float=center](click for larger image)

  • 2 foot coverage (24″)
  • A/C Galvalume only
  • With or without striations
  • Low Profile

Corrugated
[singlepic id=113 w=320 h=240 float=center](click for larger image)

  • 2 foot coverage (24″)
  • A/C Galvalume only
  • With or without striations
  • Low Profile

Tuff-Rib
[singlepic id=116 w=320 h=240 float=center](click for larger image)

  • 3 foot coverage (36″)
  • Low Profile
  • Ideal for residential applications
  • Cost effective due to efficient use of metal roll

R-Panel
[singlepic id=115 w=320 h=240 float=center](click for larger image)

  • 3 foot coverage (36″)
  • Ideal for commercial applications
  • 25′-30′ panels have few bending/kinking issues
  • Cost effective due to efficient use of metal coil

1″ Snap-Loc
[singlepic id=111 w=320 h=240 float=center](click for larger image)

  • 16″ coverage
  • Standing seam
  • No exposed fasteners so water cannot pool making it suitable for lower pitch applications (1/12 or 2/12)
  • Has a nailing flange for application; no extra steps for fastening

1.5″ Snap-Loc
[singlepic id=118 w=320 h=240 float=center](click for larger image)

  • 16″ coverage
  • Standing seam
  • No exposed fasteners so water cannot pool making it suitable for lower pitch applications (1/12 or 2/12)
  • Requires clips for application

2″ Mechanical-Loc
[singlepic id=117 w=320 h=240 float=center](click for larger image)

  • 16″ coverage
  • Standing seam
  • No exposed fasteners so water cannot pool making it suitable for lower pitch applications (1/12 or 2/12)
  • Requires clips and seaming tool for application (we sell the tools too!)